How To Install - Wheel Graphics

Wheel graphics add detail that changes the look of your motorbike wheels fast. Our stickers are cut to fit, but the right prep and application makes all the difference.

Follow these steps to get a clean, lasting finish.

"ARROW" Wheel Graphics

Install them dry for fastest adhesion or wet for easier alignment.

Before you start

• Work clean, dry, dust-free. Ideal temp: 18–24 °C (65–75 °F).

• Degrease the rim thoroughly (remove wax, silicone, tire shine).

Method 1: Dry Mount (Recommended for experienced users)

Instant adhesion – ride ready the same day. Repositioning may stretch the vinyl — align carefully.

Steps:

1. Clean rim with isopropyl alcohol, dry completely.

2. Plan layout by placing the stickers centered on the rim.

3. Fix with masking tape at the center as a hinge to hold alignment.

4. Peel back half of the liner, apply from center outward.

5. Smooth with a soft squeegee or wrapped card.

6. Remove tape, finish the other half, press edges firmly.

7. Trim overlaps or excess edges with a blade.

Method 2: Wet Mount (Optional, beginner-friendly)

Gives more time for alignment, but needs curing.

Steps:

1. Clean rim with isopropyl alcohol.

2. Mix spray: 200–300 ml water + 1 small drop dish soap.

3. Mist rim + adhesive side of sticker.

4. Position sticker, hinge with masking tape if needed.

5. Smooth out water with a squeegee, working center–out.

6. Trim overlaps or excess edges neatly with a blade.

7. Let dry 24–48 h before riding or washing.

Pro Tip

• Keep chemicals mild (pH-neutral shampoo) and hold pressure-washers at a distance.